Daylight modelling: a practical guide

28 January 2024
Sunlight falling through a window into a room with white walls.

Daylight modelling is an invaluable but often overlooked aspect of building design. Let's explore what it is, when it's used, and why it matters.

Why it matters

Daylight shapes how a room feels to live or work in. It also decides whether a planning permit goes through smoothly. Councils and rating tools now ask for evidence, not intent. A daylight model gives you that evidence early, while a change is still cheap.

This guide explains what daylight modelling is, which rules ask for it, and how to get the most from it.

What is daylight modelling?

Daylight modelling is a computer simulation of how natural light reaches the inside of a building. It uses a 3D model of your design, the surrounding buildings and a standard sky. The result shows how much light each room gets and where it falls short.

A good study looks at more than window size. It tests glass type, shading, room depth, surface colour and what sits across the street. The aim is enough light to live and work by without glare or overheating.

Which rules ask for it?

Three sets of rules usually apply. They ask different questions, so it helps to know which one your project faces.

The NCC: a minimum, set by window area

NCC 2025 F6D2 says which rooms need natural light. These include all habitable rooms in a Class 2 apartment building, bedrooms in a Class 3 building and general classrooms in primary and secondary schools. F6D3 then sets how much natural light is needed and how to provide it. Windows must have a light-transmitting area of at least 10% of the room's floor area, or roof lights at least 3%. This is a simple area check. It does not need a simulation.

Council planning: a performance test

Many Victorian councils use the Built Environment Sustainability Scorecard (BESS). Its indoor environment quality factsheet sets daylight targets for new apartments. One option is a daylight factor of at least 1% across 90% of each living area and at least 0.5% across 90% of each bedroom. The other option uses spatial daylight autonomy. For non-residential buildings, the target is a daylight factor of at least 2% across at least 30% of regularly occupied spaces. BESS notes that a daylight modelling report may be required. These are the targets that most often need a model.

Rating tools: credits for doing better

Green Star Buildings v1.1 has a Daylight and Views calculation guide, and WELL has its own light requirements. Each tool sets its own metrics and thresholds, so the model is set up to match the tool you are pursuing.

RuleWhat it checksHow you show it
NCC 2025 Part F6Natural light reaches the rooms that need itWindow area of 10% of floor area, or roof lights of 3%
BESS (council planning)How much daylight reaches each roomDaylight factor or spatial daylight autonomy, usually by simulation
Green Star or WELLDaylight quality for credits or certificationSimulation set up to each tool's method

Sources: NCC 2025 Volume One Part F6, BESS indoor environment quality factsheet (version 2, updated 13 January 2026) and GBCA Green Star Buildings v1.1. Checked on 5 November 2026.

When to model

The earlier, the better. At concept stage you can still move a window, change a room depth or adjust a balcony. Late in design, the same fix can mean new drawings and a second council round.

A few moments tend to call for a model:

  • A council request for information about daylight in apartments or offices.
  • Deep or single-aspect apartments. BESS suggests limiting single-aspect habitable rooms to 8 metres from a window.
  • Tight sites, where neighbouring buildings block the sky.
  • A Green Star or WELL target.

Why natural light is worth the effort

Daylight does more than save on lighting. Research links access to daylight at home with better sleep and circadian alignment. Studies of schools and workplaces point the same way. People simply prefer rooms with good light and a view out.

Balance matters too. Too much glass brings glare and summer heat. Too little means lights on all day. A model helps you find the point in between.

How to get the most from a daylight study

  1. Start at concept stage. This is when changes cost least.
  2. Know your target. NCC, BESS, Green Star and WELL each ask a different question.
  3. Model the real context. Include neighbouring buildings and their likely future form, as BESS asks.
  4. Test options, not just one design. Small changes to glass, shading or finishes often close the gap.
  5. Share the results visually. Daylight maps help councils and clients see the outcome.

A quiet word before you go

If a council has asked about daylight, or you want to check a design before lodging, we are happy to talk it through. Often a small change does the job without a redesign. You can read about our daylight modelling service, or send us your drawings and we will tell you honestly whether a model is needed.

Questions or corrections: contact Makao.